Speed Queen SA4980 Washer Manual

The Speed Queen SA4980 is a top-load washer designed for durability and efficiency. It features a robust construction, advanced washing technology, and multiple wash cycles to cater to various fabric types. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Heavy-duty construction, multiple wash cycles, adjustable water levels, and energy-efficient operation.

Feature	Description
Heavy-duty Agitator	Ensures thorough cleaning of clothes
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficient	Designed to save water and energy
Durable Construction	Built to withstand heavy use
Adjustable Water Levels	Allows for optimal water usage based on load size

Installation

Unpack the washer and inspect for any damage. Position the washer on a flat, stable surface.

Connect the water supply hoses to the appropriate inlet valves.
Ensure the drain hose is properly positioned to avoid leaks.
Plug the washer into a grounded electrical outlet.
Level the washer using adjustable legs.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

Select the desired wash cycle based on fabric type.
Adjust water temperature settings as needed.
Load the washer with laundry, ensuring not to overload.
Press the start button to begin the wash cycle.

CAUTION! Do not exceed the maximum load capacity.

Specifications

Model: Speed Queen SA4980
Type: Top-Load Washer
Capacity: 3.2 cu. ft.
Power Supply: 120V, 60Hz
Water Consumption: Adjustable based on load size
Wash Cycles: Multiple settings for various fabrics
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access the control panel to select wash cycles, water temperature, and spin speed.

Control Panel: Start/Stop button, cycle selector, temperature settings, and spin speed options.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Attach hoses to the washer and the water supply valves.
Check for leaks after turning the water supply back on.

Tip: Use Teflon tape on hose threads to prevent leaks.

Operating the Washer

Follow the instructions to operate the washer effectively.

Load laundry and add detergent as per instructions.
Select the appropriate wash cycle and settings.
Press the start button to begin washing.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance of the washer.

Clean the lint filter regularly.
Inspect hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked or blocked	Inspect hoses and ensure water supply is on.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Excessive vibration	Unlevel washer	Adjust legs to level the washer.
Water leaking	Loose hoses	Tighten hose connections and check for damage.

Service: For further assistance, contact Speed Queen customer support.