Speed Queen SA4950 Washer Manual

The Speed Queen SA4950 is a top-loading washer designed for durability and efficiency. It features a robust construction, advanced washing technology, and a variety of wash cycles to accommodate different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Heavy-duty stainless steel tub, multiple wash cycles, adjustable water levels, and energy-efficient operation.

Feature	Description
Heavy-duty construction	Designed for long-lasting performance
Multiple wash cycles	Options for different fabric types and soil levels
Adjustable water levels	Customize water usage based on load size
Energy-efficient	Meets energy-saving standards
Stainless steel tub	Resists chipping and snagging

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select wash cycle: Use the control panel to choose the desired cycle.
Set water temperature: Choose between hot, warm, or cold settings.
Load laundry: Do not overload the washer for optimal performance.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Speed Queen SA4950.
Type: Top-loading washer.
Capacity: 3.2 cubic feet.
Water Usage: Adjustable levels for efficiency.
Power Source: 120V AC, 60Hz.
Dimensions: 27 inches wide, 42 inches high, 28 inches deep.
Weight: 200 lbs.

Controls and Settings

Access settings via the control panel. Options include wash cycle selection, water temperature, and spin speed.

Indicators: Cycle status, water level, and error notifications.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water outlets.
Check for leaks after connections are made.

Tip: Use Teflon tape on threads for a secure fit.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry and add detergent.
Select desired wash cycle and options.
Press START to begin the wash cycle.
Wait for the cycle to complete; the washer will notify you.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Reset: Unplug for 5 minutes to reset the control board.