Speed Queen HA4370 Washer Manual

The Speed Queen HA4370 is a top-load washer designed for durability and efficiency. It features a robust construction, advanced wash technology, and a variety of wash cycles to meet your laundry needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Heavy-duty construction, multiple wash cycles, user-friendly controls, and energy-efficient operation.

Feature	Description
Heavy-duty drum	Designed for long-lasting performance
Multiple wash cycles	Customizable settings for different fabric types
Energy-efficient	Meets energy-saving standards
User-friendly controls	Intuitive interface for easy operation
Self-cleaning filter	Maintains optimal performance

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Level the washer: Adjust feet to ensure stability.
Plug into AC power: Ensure proper voltage and grounding.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the dial to choose the desired cycle.
Set water temperature: Adjust according to fabric care instructions.
Add detergent: Use the recommended amount for optimal cleaning.

CAUTION! Do not overload the washer; follow load capacity guidelines.

Specifications

Model: HA4370
Type: Top-load washer
Capacity: 3.2 cubic feet
Power Supply: 120V AC, 60Hz
Water Consumption: Efficient water usage per cycle
Dimensions: 27" W x 42" H x 27" D
Weight: 150 lbs

Controls and Settings

Access wash settings via the control panel. Features include cycle selection, temperature control, and spin speed adjustment.

Cycle Options: Normal, Delicate, Heavy Duty, Quick Wash.

Connecting Water Supply

Ensure proper connection to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Match hoses to corresponding water inlets.
Check for leaks after connections are made.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Load clothes into the drum, select the desired cycle, and press start.

Load clothes evenly around the drum.
Select the appropriate wash cycle.
Press the start button to begin washing.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace as needed.
Run a cleaning cycle monthly to remove residue.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hoses kinked	Ensure hoses are straight and connected properly.
Clothes not clean	Overloading	Reduce load size and use appropriate detergent.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.

Reset: Unplug for 5 minutes to reset the control board.