Speed Queen FLW2173N Washer Manual

The Speed Queen FLW2173N is a top-loading washer designed for durability and efficiency. With a capacity of 3.2 cubic feet, it features a robust stainless steel wash tub, multiple wash cycles, and advanced technology to ensure optimal cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Stainless steel wash tub, multiple wash cycles, adjustable water levels, and energy-efficient design.

Feature	Description
Stainless Steel Tub	Durable and resistant to chipping and cracking
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficient	Designed to save water and energy
Adjustable Water Levels	Allows for optimal water usage based on load size
Quiet Operation	Minimizes noise during washing

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the washer and faucet.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.
Check for leaks before use.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle based on load type.
Adjust water level if necessary.
Load clothes into the washer.
Press start to begin washing.

CAUTION! Do not overload the washer for optimal performance.

Specifications

Capacity: 3.2 cubic feet.
Wash Cycles: 8 different cycles.
Spin Speed: Up to 700 RPM.
Water Efficiency: Low water usage per cycle.
Power Source: 120V AC, 60Hz.
Dimensions: 43" H x 27" W x 27" D.
Weight: 120 lbs.

Controls and Settings

Access controls via the front panel. Features include cycle selector, water level adjustment, and start/pause button.

Cycle Selector: Choose from various wash cycles based on fabric type.

Water Level Adjustment: Set the appropriate water level for your load size.

Connecting Water Supply

Ensure proper connection to both hot and cold water supplies.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold inlets.
Check for leaks after connections are made.

Tip: Use plumber's tape to ensure a tight seal on connections.

Operating the Washer

Follow the steps for optimal washing performance.

Load clothes evenly in the tub.
Select the desired wash cycle and options.
Press the start button to begin the wash cycle.
Wait for the cycle to complete before unloading.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Wipe down the exterior with a damp cloth.
Check hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Excessive noise	Unbalanced load	Redistribute clothes evenly in the tub.
Water leaking	Loose connections	Check and tighten all hose connections.

Reset: Unplug for 5 minutes to reset the washer.