Speed Queen AWS76NW Washer Manual

The Speed Queen AWS76NW is a top-loading washer designed for durability and efficiency. It features a robust construction, advanced wash technology, and a variety of wash cycles to accommodate different fabric types. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Heavy-duty construction, multiple wash cycles, adjustable water levels, and energy-efficient operation.

Feature	Description
Heavy-duty Agitator	Provides thorough cleaning for all fabric types
Multiple Wash Cycles	Customizable settings for different laundry needs
Adjustable Water Levels	Optimizes water usage based on load size
Energy Efficient	Designed to save water and electricity
Durable Construction	Built to withstand heavy use

Installation

Unpack the washer and inspect for any damage. Ensure the installation area is level and stable.

Connect the water supply hoses to the washer and the faucet.
Plug the washer into a grounded electrical outlet.
Ensure the drain hose is properly positioned.
Check for leaks and secure all connections.

WARNING! Ensure the washer is properly leveled to avoid vibrations during operation.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select the desired wash cycle using the control panel.
Adjust water temperature settings as needed.
Load laundry into the drum and close the lid securely.
Press the start button to begin the wash cycle.

CAUTION! Do not overload the washer to ensure optimal performance.

Specifications

Model: AWS76NW
Capacity: 3.2 cu. ft.
Wash Cycles: 8 different cycles
Water Efficiency: Low water usage per cycle
Power Supply: 120V, 60Hz
Dimensions: 27" W x 42" H x 27" D
Weight: 120 lbs

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and monitor progress.

Control Features: Start/Stop button, cycle selector, temperature settings, and water level adjustment.

Connecting Water Supply

Ensure proper connection to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Attach hoses securely to the washer and faucet.
Check for leaks after turning the water supply back on.

Tip: Use plumber's tape on hose threads to prevent leaks.

Operating the Washer

Follow the instructions for optimal use of the washer.

Load laundry and add detergent.
Select the appropriate wash cycle.
Press the start button to begin the wash.
Wait for the cycle to complete, then remove laundry.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Wipe down the exterior with a damp cloth.
Check hoses for wear and replace if necessary.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unlevel washer	Adjust the feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Water leaking	Loose hose connections	Check and tighten all hose connections.

Reset: Unplug for 5 minutes to reset the system.

Service: For assistance, contact Speed Queen customer service.